Skip to content

USB Controller Tester

Verify wired USB pads with the most reliable browser detection path.

Start testing Read guide
USB Controller Tester

USB connection panel

Use this when Bluetooth pairing is unreliable and you want a wired baseline.

Prefer cables when you need stable Gamepad API data

USB Controller Tester emphasizes wired connections because they usually deliver steadier polling, more reliable rumble actuators, and fewer pairing surprises. Plug in, press a button, and validate inputs without Bluetooth variables. When wireless later fails, you already have a wired baseline from this page or the general Controller Tester.

Bad cables, flaky ports, and unpowered hubs still create ghost disconnects. The Gamepad API will simply show the device vanishing; it cannot repair a damaged wire. Try another port on the motherboard rear I/O before blaming the pad.

Wired troubleshooting example

  1. Connect directly to a rear USB port, not a cheap hub.
  2. Wake detection with any face button.
  3. Run a quick stick idle check via Stick Drift.
  4. Attempt rumble on Vibration while still wired.

If only Bluetooth fails afterward, continue on Bluetooth Controller Tester. Detection-wide issues belong on Controller Detection. For a full USB walkthrough, read How to Test a Generic USB Gamepad.

FAQ: does USB always enable adaptive DualSense features?

No. Even over USB, browsers lack full DualSense advanced APIs. Wired mode mainly improves detection and basic rumble odds.